A Preliminary Research on the Development of the Hard X-ray Imaging Telescope

The hard X-ray imaging telescope based on the Fourier transform imaging technique is introduced. The double-layer parallel gratings are used to make the modulation and coding on the light emerging from a celestial X-ray source, the modulated light is acquired, to make the optoelectronic conversion by scintillation crystal detectors, and ?nally read out by the electronic system. The modulation collimator X-ray telescopes can be divided into two types: the spatial modulation and temporal modulation. The temporal modulation system requires the scanning motion of the detector system, but the spatial modulation system requires no motion. The technology of grating fabrication is investigated, and the basic structure design of the collimators is given. The principal compo- nents of the prototype hard X-ray imaging telescope of spatial modulation type are successfully developed, including the 8 CsI crystal detector modules (contain- ing photomultipliers or PMTs), 8-channel shaping ampli?ers (two of them are prepared for experiments), and the data acquisition system. And the preliminary test results of the electronic system are also given.     

基于ANSYS的SUC鼓型橡胶护舷防冲板的有限元分析

鼓型橡胶护舷防冲板是港口防冲体系中的重要装置,如何有效合理分析复杂船舶荷载冲击下的受力特点是进行其结构设计的关键技术问题.以大连某实际工程为例,基于通用有限元软件ANSYS建立了 SUC鼓型橡胶护舷防冲板的三维计算模型,开展了四种典型靠泊方式的仿真研究.针对防冲板中的关键部位进行了应力和变形研究,并对护舷选型及船舶停泊...     

VLBI相位校正信号提取的软件实现方法

从VLBI相关处理结果中提取的延迟值包括了天线、终端等设备的时延,必须对其加以修正,最终结果才能达到精度要求。提取相位校正信号,可以消除这些设备引入的时延,从而校正同一波前信号到达基线两端的几何时延。该文介绍了提取相位校正信号的原理、算法及软件实现方法。软件采用多线程和SSE技术,具备4台站多通道全部相位校正信号提取能力。     

Structural Control of Sand Bodies and Deep Exploration for Oil and Gas

The structural styles can be used to analyses and predict developments and distributions of sand bodies in a rift basin. The dynamic process of faulting and sedimentation can be expressed as follow: the basin topography controlled by fault activity can control water dynamics; which in turn affect the transport and sedimentation of sediments. The corresponding analysis between structural styles and sand depositional types includes the following aspects: (1) in section, the corresponding between development of fault terraces and sand depositional types; (2) in plane, the relationship between faults' association and distributions of sand bodies. There are four types of terrace styles to be identified. They are Steep Slope Single Fault Terrace (SSSFT), Steep Slope Multiple Fault Terrace (SSMFT), Gentle Slope (GS) and Gentle Slope Multiple Fault Terrace (GSMFT), which also can be divided into six subtypes by the timing of the faults activities and the directions of their activity migrations (basinward and landward or marginward). They correspond to the following sand depositions such as alluvial fan, fan delta and turbidite fan etc.. The analysis of structure-sedimentation is a discussion on the rank Ⅲ sequence evolution under the condition of pulsing or episodic fault activities. It has been recognized four plane fault associations such as the comb, the broom, the fork and the fault-fold association as well as the corresponding sand distributions. Structural-sedimentary models above mentioned are significant for the deep oil and gas exploration when lacking of the drill data. It may reduce multiple resolutions in the interpretation of seismic-sedimentary facies and promote sand predictions through the constraints of the structural styles of the basin units. The structural-sedimentary pattern can be used as a geological model in oil and gas exploration in the rift basins.     

计算机制图综合的研究进展

本文简明而较全面地评述利用计算机进行制图综合研究之发展的过去和现状,并展望该领域的未来发展趋势。     

储良广眼砧穗不亲和问题研究

储良广眼的砧穗不亲和现象在众多个体中呈现从亲和至不亲和的连续变化，随砧、穗周长差异的增大，不亲和症状表现突出。砧、穗周长比值与几个生长量指标存在显著相关。提出以砧／穗比作为衡量不亲和程度指标。靠接加砧结果表明对严重不亲和树出现的症状有较大的缓解。     

Study on drilling mechanism and optimization of percussion-extruding DTH hammer bit

The authors tested the percussion-extruding Down-the-hole （DTH）hammer bit with five different structures and mainly analyzed the drilling mechanism between conical bit and stepped bit. In addition, aiming at ＂the pile effect＂ in combination with the advantage＇ of stepped bit, we design a new cam spinning bit and test it outdoors. The result shows that using cam spinning bit can solve the problem of ＂the pile effect＂, which can also obtain higher drilling efficiency than using conical bit in high confining pressure strata. It is characterized by novel structure and high drilling speed as well as good guiding, and it is significant for improving efficiency in percussion-extruding drilling technique.     

南海北部神狐海域天然气水合物形成及分布的地质因素

从天然气水合物发育的地质构造条件、沉积条件、气源条件、温压条件等分析了神狐海域影响水合物形成及分布的地质因素.指出神狐海域处在洋陆壳的过渡带上,断裂-褶皱构造及流体底辟构造发育,对水合物的形成具有重要的控制作用.受等深流和海底滑塌双重作用,研究区沉积异常体发育,沉积厚度大、沉积速率高,有利于水合物发育.通过对神狐海域附近钻探结果及区内地质调查站位资料的分析表明:目标区具有含巨量的生物气和热成因气资源潜力,具备形成天然气水合物的气源条件,气源为文昌-恩平组烃源岩.此外,受热流值北高南低的分布格局的影响,神狐海域BSR埋深也表现为北部浅南部深,且BSR分布区整体处在天然气水合物稳定存在的温压范围内,满足水合物形成及保存所需的温压条件.神狐海域的地质构造条件、沉积特征、气源条件、温压条件等都非常有利于天然气水合物发育.     

涌浪对风浪能量影响的实验研究

在实验室风浪水槽中进行纯风浪和混合浪波面位移观测,研究波长较长的规则波对风浪能量的影响.本文用混合浪和纯风浪中的风浪显著波的零阶谱矩之比代表混合浪中的风浪与纯风浪能量之比,并以此表征涌浪对风浪能量的影响.研究了该能量比随涌浪波陡S、风区x、波龄倒数u/C、涌浪频率与纯风浪谱峰频率之比fs/fwp的变化规律.结果表明,涌浪对风浪能量的抑制作用随涌浪波陡的增加、波龄倒数的增大及涌浪频率与纯风浪谱峰频率之比的增大而增强.发现该能量比依赖于无因次量R=(1+80(πS)2)1.9(fs/fwp)0.9(u/C)0.27,并拟合得到2者的经验关系.此外,本文实验还发现,在某些情况下,涌浪的存在使风浪能量增加.     

EM算法的BFGS和DFP联合加速算法

使用非线性规划中的变度量法BFGS算法和DFP算法给出了一种新的加速EM算法收敛的方法。